Features
and benefits...
*
Support
sleeve located in main nut assembly reduces "pull
back" during installation
*
Back nut
radius allows smooth transition of heat shrink tubing
*
Visible
entry of center conductor into seizing mechanism (no blind
entry)
* Unique
actuator closing mechanism preserves reusability
* Flush
insulator prevents moisture from collecting or migrating
along the path
* Non-rotational
design for installation and disassembly
* Brass
pins with bright acid tin plating for excellent RF
conductivity
Ordering
information
Please refer to
our Internet catalogue for specific item numbers or call the nearest
Corning Cabelcon distributor or sales office.
Link
to GRS connectors...
|
 
G2
series 2-piece trunk and distribution connectors
Developed in response for a need of an intelligent two-piece
connector that will provide superior performance, while
eliminating the common disadvantages of traditional 2-piece
designs.
It is the only two-piece connector on
the market that gives installers a full view of the cable's
center conductor insertion in to the connector seizing
mechanism.
It
provides a patented support sleeve located in the back nut of
the connector, minimizing cable "pull back".
The
Tri-Start thread system (patent pending) minimizes the
required back nut rotations when tightening the connector. The
G2 connectors have a center conductor cutting guide and are
reusable.
|
|
Connector
Specifications...
Bandwith:
5 MHz to 1 GHz
Operating
Range:
-40º C to +60º C
Nominal
Impedance:
75 Ohms
Shielding
effectiveness:
> 130 dB
Return
Loss:
- 30 dB minimum
Insertion
Loss
< 0.12 dB (pin types)
Cable
retention:
Exceeds cabel
manufacturers
maximum pulling tension
specifications |
